Turbine Meter Repair Kits
Depending on the nature of the service, all turbine flow meters require replacement of rotors with time. The rotors, shafts, bearings and rotor supports along with K-factors based on three point factory calibrations are supplied with all retrofit kits sold. TURBINE RETROFIT KITS ARE COMPATIBLE WITH BLANCETT, HALIBURTON, NUFLO, PEMBINA AND OTHERS AND ARE AN EXCEPTIONAL REPLACEMENT VALUE.INLINE RETROFIT KITS IN FIRST TABLE, WAFER KITS BELOW
| Turbines Flow Meter Part No: | Standard End Connection | Meter Line Size | Turbines Retro Kit Part Number |
|---|---|---|---|
| TM0038 |
1″ X 1″ Male NPT |
3/8″ | TK0038 |
| TM0050 | 1″ X 1″ Male NPT | 1/2″ | TK0050 |
| TM0075 | 1″ X 1″ Male NPT | 3/4″ | TK0075 |
| TM0078 | 1″ X 1″ Male NPT | 7/8″ | TK0078 |
| TM0100 | 1″ X 1″ Male NPT | 1″ | TK0100 |
| TM0150 | 1-1/2″ X 1-1/2″ Male NPT | 1-1/2″ | TK0150 |
| TM0200L | 2″ X 2″ Male NPT | 1-1/2″ | TK0200L |
| TM0200 | 2″ X 2″ Female NPT | 2″ | TK0200 |
| TM0300 | 3″ Victaulic end | 3″ | TK0300 |
| TM0400 | 4″ Victaulic end | 4″ | TK0400 |
| TM0600 | 6″ Victaulic end | 6″ | TK0600 |
| TM0800 | 8″ Victaulic end | 8″ | TK0800 |
| TM1000 | 10″ Victaulic end | 10″ | TK1000 |
| Turbines Flow Meter Part No: | Meter Line Size | Turbines Retro Kit Part Number |
|---|---|---|
| WM0038 | 3/8″ X 1″ | WK0038 |
| WM0050 | 1/2″ X 1″ | WK0050 |
| WM0075 | 3/4″ X 1″ | WK0075 |
| WM0078 | 7/8″ X 1″ | WK0078 |
| WM0100 | 1″ X 1″ | WK0100 |
| WM0100 X 2 | 1″ X 2″ | WK0100 X 2 |
| WM0150 X 2 | 1-1/2″ X 2″ | WK0150 X 2 |
| WM0200 X 2 | 2″ X 2″ | WK0200 X 2 |
| WM0300 X 3 | 3″ X 3″ | WK0300 X 3 |
| WM0400 X 4 | 4″ X 4″ | WK0400 X 4 |
