This line offers all stainless steel precision machined components with 416 rotors in line sizes from 3/8″ through 10.0″ (or larger on request.) Wafer style refers to meters that are installed between existing process piping flanges. K-factors based on three point factory calibrations are supplied with all meters sold.SERIES WM WAFER STYLE TURBINE FLOW  METER FOR LIQUID SERVICE

Turbines Part No:	Meter Size inches	Flow Range GPM	Flow Range LPM
WM0038	3/8″ x 1″	0.3 – 3.0	1.14 – 11.36
WM0050	1/2″ x 1″	0.75 – 7.50	2.84 – 28.39
WM0075	3/4″ x 1″	2.0- 15.0	7.57 – 56.78
WM0078	7/8″ x 1″	3.0 – 30.0	11.36 – 113.56
WM0100	1″ x 1″	5.0 – 50.0	18.93 – 189.27
WM0100 X 2	1″ x 2″	5.0 – 50.0	18.93 – 189.27
WM0150 X 2	1-1/2″ x 2″	15.0 – 180.0	56.78 – 681.35
WM0200 X 2	2″ x 2″	40 – 400	151.41 – 1,514.12
WM0300 X 3	3″ x 3″	60 – 600	227.12 – 2,271.18
WM0400 X 4	4″ x4″	120 – 1,200	454.24 – 4542-36

Continued…

Turbines Part No:	Flow Range MPD	Flow Range BPD	Max Pressure PSI
WM0038	1.6 – 16	10 – 100	3,700
WM0050	4 – 40	25 – 250	3,700
WM0075	11 – 80	68 – 514	3,700
WM0078	16 – 160	100 – 1,000	3,700
WM0100	27 – 270	170 – 1,700	3,700
WM0100 X 2	27 – 270	170 – 1,700	3,700
WM0150 X 2	80 – 1,100	515 – 6,000	3,700
WM0200 X 2	210 – 2,100	1,300 – 13,000	3,700
WM0300 X 3	320 – 3,200	2,100 – 21,000	3,700
WM0400 X 4	654.12 – 6,541.18	4,100 – 41,000	3,700