Twitter LinkedIn Facebook

Cameron Measurement NUFLO™ MC-II™ Plus EXP Flow Analyzer

    

cameron/mcII_plus_EXP.jpg
The Cameron NUFLO™ MC-II™ Plus EXP Flow Analyzer is used for calculating and displaying instantaneous flow rates and accumulated totals from a turbine flow meter input signal. The LCD displays seven-digit totals and six-digit rates, as well as a selection of commonly used engineering units for rate and volume. The calibration is implemented by entering the calibration factor of the flow meter and selecting the desired units of measurement. It then automatically calculates its own divisor. It even lets you input gas calculation parameters and self-calculates the calibration factor for gas in standard cubic feet. The unique combination of inputs and outputs offers flexibility.

The MC-II Plus EXP Flow Analyzer connects to a turbine meter using quick disconnects. It takes the turbine meter signal directly in, without the use of preamplifiers. A remote reset input allows the total to be cleared from a remote computer. The user can select either a 4-20 mA output or an amplified flow meter frequency output which may be used by remote equipment to calculate flow rates and volume. This explosion proof instrument is an all-in-one instrument.

Technical Literature:

mcII_battery.jpg
Cameron NUFLO™ Lithium Battery

Replacement Lithium Battery 3.6V for use in Cameron NUFLO™ MC-II Plus EXP and MC-III Plus EXP Flow Analyzers

P/N: 9A-100005111

Technical Literature:

$75.00
mv_battery.jpg
Meter & Valve Lithium Battery

Meter & Valve Replacement Lithium Battery 3.6V for use in Cameron NUFLO™ MC-II Plus EXP and MC-III Plus EXP Flow Analyzers

P/N: MV-100005111

Technical Literature:

$65.00